Index of /download/dist/upc-tests
This directory contains a number of test suites of UPC code, see each suite for
licensing details.
Note that most of the code in this subdirectory tree was contributed by
outside sources, and the Berkeley UPC group makes no claims of
correctness, optimality or suitability of this code for any purposes.
In particular, be aware that the Makefiles provided may not be setup
appropriately for Berkeley UPC. To run the tests, we recommnend use
of the automated test harness in ../harness. However, the
descriptions below note steps required to use 'make' when supported.
Brief descriptions of the subdirectories
----------------------------------------
mupc - redistribution of the MuPC test suite:
http://www.upc.mtu.edu/
To use 'make':
+ Edit the runall.sh script as needed.
+ Compiler defaults to 'upcc', which assumes it is in your PATH.
gwu - redistribution of an older GWU test suite:
https://www.gwu.edu/~upc/
NOTE: These are NOT always the most current versions of GWUs codes
To use 'make':
+ Set the UPCC and THREADS variables.
+ UPCC defaults to 'upcc', which assumes it is in your PATH.
gwu-upc-io - redistribution of the GWU UPC-IO test suite:
https://www.gwu.edu/~upc/
NOTE: These are NOT always the most current versions of GWUs codes
To use 'make':
+ Edit the first 10 or so lines of Makefile.
+ Compiler setting is CC, not UPCC, and defaults to a full path
which is almost certainly not correct on your system.
+ Variable NP must be set to the desired thread count.
gwu-npb-upc - redistribution GWU's UPC implementations of the NAS parallel benchmarks
http://threads.hpcl.gwu.edu/sites/npb-upc
To use 'make':
+ Running 'make' with no arguments provides some instructions.
+ UPCC defaults to 'upcc', which assumes it is in your PATH.
guts_main - redistribution of a portion the GWU Unified Testing Suite
http://threads.hpcl.gwu.edu/sites/guts/
To use 'make':
+ NOT SUPPORTED - use the Berkeley UPC test harness.
+ However, most tests can be built as normal UPC programs, needing
'-Iinclude' as the only extra compiler flag.
intrepid - redistribution of the Intrepid/SGI/GNU test suite:
https://www.intrepid.com/
To use 'make':
+ NOT SUPPORTED - use the Berkeley UPC test harness.
+ However, most tests can be built as normal UPC programs.
CGBENCH - implementation of conjugate gradient in UPC, MPI and OpenMP by
the University of North Carolina:
https://www.cs.unc.edu/~prins
To use 'make':
+ Compiler setting is CC, not UPCC, and defaults to 'upcc', which
assumes it is in your PATH.
+ CLINK should normally be set to the same value as CC.
+ Running 'make' with no arguments provides some instructions.
benchmarks - microbenchmarks by the Berkeley UPC compiler group and others
https://upc.lbl.gov
To use 'make':
+ NOT SUPPORTED - use the Berkeley UPC test harness.
+ However, most tests can be built as normal UPC programs.
UPC-Coll-RefImp - redistribution of the MTU UPC Collectives implementation
http://www.upc.mtu.edu/
To use 'make':
+ Set the UPCC and N variables if needed.
+ UPCC defaults to 'upcc', which assumes it is in your PATH.
+ If N is unset, builds for dynamic threads environment.
collectives - modified tests extracted from the MTU Collective implementation
http://www.upc.mtu.edu/
To use 'make':
+ NOT SUPPORTED - use the Berkeley UPC test harness.
uts - redistribution of the Unbalanced Tree Search (UTS) code v1.1
http://barista.cse.ohio-state.edu/wiki/index.php/UTS
To use 'make':
+ Indended that the user run the configure script. However, one
can pass 'CONFFILE=config/linux-cluster' to make when using
Berkeley UPC as your compiler (even when NOT on a Linux system).
+ UPCC defaults to 'upcc', which assumes it is in your PATH.
upcr-tests - Berkeley UPC Runtime unit tests
detect-upc - Berkeley UPC preprocessor unit tests
https://upc.lbl.gov
Tests for various apects of Berkeley UPC and GASNet runtimes
NOTE: These are of little value except to compiler/runtime implementers
NOTE: gasnet-tests has been moved into the GASNet repo at tests/upcr-harness
To use 'make':
+ NOT SUPPORTED - use the Berkeley UPC test harness.
bugzilla - regression tests from the Berkeley UPC bug database system
https://upc-bugs.lbl.gov/bugzilla/
NOTE: These are of little value except to compiler/runtime implementers
To use 'make':
+ NOT SUPPORTED - use the Berkeley UPC test harness
Notes on writing regression tests for Berkeley UPC
--------------------------------------------------
*** All tests must be added to a harness.conf file
Each testing directory contains a harness.conf file with settings to control
the execution of the tests in that directory. When adding a new test, you must
add an entry to that file to control it, otherwise your test will not be run
with the automated tester. Be sure to check the expected success and failure
outputs are set correctly - good tests should output both failure and a
success indications as appropriate, in order to prevent false positives
(eg a common failure mode, especially on clusters, is to crash on startup without
producing any output or visible indication of crash. The harness needs a way
to distinguish this behavior from a success - so your program should print
something on success).
*** Do not rely on exit codes
Some platforms and backends (especially on loosely coupled clusters) have
trouble propagating the program exit code in a reliable manner. Therefore, your
test should indiciate success or failure using stdout/stderr, and never solely
relying on an exit code.
*** All tests must work in parallel
Unless you configure the harness.conf entry otherwise, the harness will be used
to run your test both in serial *and* parallel, both with and without pthreads.
This means all tests must be written to be free of parallel race conditions
(even if the bug you're reporting is visible with a single thread), otherwise
your test could generate false negatives when run in parallel mode. If you're
confident that parallel mode is irrelevant to your test, then if nothing else,
place a "if (MYTHREAD==0) {}" around the contents of main() and place a barrier
at the end. If you take an approach where only one thread does the work,
be sure that no thread can reach a call to upc_global_exit() before that thread
does its job. Also be sure not to call into any external code or libraries
which may not be pthread-safe.
*** All tests must be architecture-independent and OS-independent
The harness is used to run your test on a variety of OS's and backend C
compilers, on architectures with varying sizes for the basic types, and with
different struct ptr representations. Therefore, your test should not make any
assumptions about sizeof() for any type, nor should it rely on any library
functions, headers or language extensions which are not part of the C99 and UPC
specs. This notably includes the following often-problematic OS-specific functions:
sched_yield - use sleep(0)
random/srandom - use rand/srand
*** Passing upc_threadof/upc_phaseof/upc_addrfield to printf-family fns
Code of the form:
printf("%i %i %i", upc_threadof(x), upc_phaseof(y), upc_addrfield(z));
is always a bug, because these functions all return size_t, which is
often a different type than int (usually not even the same size on LP64).
The code above is likely to produce garbage output on LP64 platforms.
The correct (portable) way to write this code is to cast the result to a known
type before passing it to printf:
printf("%i %i %lu", (int)upc_threadof(x),
(int)upc_phaseof(y), (unsigned long)upc_addrfield(z));
This ensures correct behavior everywhere (also note the use of unsigned long
with upc_addrfield, to prevent truncation on LP64).
*** printf format specifiers: use %f NOT %lf:
%lf causes warnings on some compilers (eg gcc 2.95.2) and has absolutely no
effect (even according to the language spec) - C's default argument promotion
requires and ensures that all float or double variables passed to varargs
function like printf are passed as doubles, so specifying %lf for a double is
redundant and unnecessary - %f is already a double.
![[ICO]](/icons/blank.gif){kind=icon}
![[PARENTDIR]](/icons/back.gif){kind=icon}
![[DIR]](/icons/folder.gif){kind=icon}
![[ ]](/icons/unknown.gif){kind=icon}
![[TXT]](/icons/text.gif){kind=icon}