From: Tahar Amari (amari_at_cpht.polytechnique.fr)
Date: Thu Feb 05 2009 - 08:13:39 PST
Mike: You are right I have Version: 3.3.2 I should get Eclipse 3.4 first right ? Tahar -------------------------------------------- T. Amari Centre de Physique Theorique Ecole Polytechnique 91128 Palaiseau Cedex France tel : 33 1 69 33 42 52 fax: 33 1 69 33 30 08 email: <mailto:[email protected]> URL : http://www.cpht.polytechnique.fr/cpht/amari Le 5 f�vr. 09 � 17:04, Mike Kucera a �crit : > I think that update site might only work for Eclipse 3.4. Could you > please verify your eclipse version: Help > About Eclipse. Or maybe > you have a connection problem and can't reach the update site. > > Alternatively you can try installing UPC from a zip file. Here are > the instructions: > > To install without using a remote update site: > > 1. Download the "cdt master" file from the CDT builds site (http://download.eclipse.org/tools/cdt/builds/5.0.2/index.html > ). Choose the one that says "final" and save it to your computer. > 2. Launch Eclipse, bring up software updates as described before > Help, Software Updates... Under Available Software, Click "Add Site" > then click "Archive..." > 3. Enter the location of the cdt-master zip you downloaded. > 4. Continue as before and select the CDT and/or UPC features you > want to install. > 5. Restart eclipse when prompted. > > > Mike Kucera > Software Developer > IBM Eclipse CDT Team > mkucera_at_ca_dot_ibm_dot_com > > <graycol.gif>Tahar Amari ---02/05/2009 10:49:03 AM---Hi Mike, Sorry > after the step 5 is performed > > <ecblank.gif> > From: <ecblank.gif> > Tahar Amari <[email protected]> > <ecblank.gif> > To: <ecblank.gif> > Mike Kucera/Toronto/IBM@IBMCA > <ecblank.gif> > Cc: <ecblank.gif> > Tahar Amari <[email protected]>, Dan Bonachea <bonachea_at_cs_dot_berkeley_dot_edu > >, owner-upc-users_at_lbl_dot_gov, upc-users_at_lbl_dot_gov > <ecblank.gif> > Date: <ecblank.gif> > 02/05/2009 10:49 AM > <ecblank.gif> > Subject: <ecblank.gif> > Re: UPC does not show up > > > > Hi Mike, > > Sorry after the step 5 is performed > > I have an error message : "No features found on the selected site. > Choose a different site or site category" > > Tahar > > > > -------------------------------------------- > T. Amari > Centre de Physique Theorique > Ecole Polytechnique > 91128 Palaiseau Cedex France > tel : 33 1 69 33 42 52 > fax: 33 1 69 33 30 08 > email: <mailto:[email protected]> > URL : http://www.cpht.polytechnique.fr/cpht/amari > > Le 5 f�vr. 09 � 16:32, Mike Kucera a �crit : > Hi Tahar, > > After installing Eclipse did you follow the instructions for > installing the UPC plug-in using the update manager? In case you > missed this step here are the instructions: > > To use the update manager to install UPC support > 1. Start Eclipse > 2. Help > Software Updates ... > 3. Select "Available Software" tab at top > 4. Select "Add Site..." > 5. Select "New Remote Site" and enter http://download.eclipse.org/tools/cdt/releases/ganymede > 6. Expand the item to see the features it includes. > 7. Check the features you want to install. Under CDT Optional > Features, check "Unified Parallel C Support" > 8. Click the "Install" Button in the upper right corner. > 9. Review the items that appear in the "Install" Dialog, and click > "Next>" > 10. Accept the license terms, and click "Finish" > 11. The CDT features are downloaded and installed; restart Eclipse > when prompted. > > I tried following these instructions with Eclipse 3.4 and CDT 5.0 > and it works for me. Is this the way you installed it? I'm not using > a mac but I know a few people who do use macs and they have not had > any problems getting UPC to work (that I know of). > > If its still not working here are a couple things you could try: > > 1) The UPC feature depends on the "LR Parser" feature. When you > install UPC it is supposed to calculate the dependencies and install > the LR Parser for you but perhaps it didn't. Try manually installing > the LR Parser the same way you installed the UPC plugin. > 2) Check if there is anything UPC related in the error log, this may > give a clue to the problem. Go to Window > Show View > Other... > > General > Error Log. > > > Mike Kucera > Software Developer > IBM Eclipse CDT Team > mkucera_at_ca_dot_ibm_dot_com > > <graycol.gif>Tahar Amari ---02/05/2009 09:52:05 AM---Hello Mike, I > installed successifully Eclipse on Mac OS X and followed your link > <ecblank.gif> > From: <ecblank.gif> > Tahar Amari <[email protected]> > <ecblank.gif> > To: <ecblank.gif> > Mike Kucera/Toronto/IBM@IBMCA > <ecblank.gif> > Cc: <ecblank.gif> > Dan Bonachea <bonachea_at_cs_dot_berkeley_dot_edu>, Tahar Amari <[email protected] > >, owner-upc-users_at_lbl_dot_gov, upc-users_at_lbl_dot_gov > <ecblank.gif> > Date: <ecblank.gif> > 02/05/2009 09:52 AM > <ecblank.gif> > Subject: <ecblank.gif> > UPC does not show up > > > > Hello Mike, > > I installed successifully Eclipse on Mac OS X and followed your link > > Unfortunately when I a arrived at the point > > > Open C/C++, Language Mappings add a content type "C Source File" > Language "UPC" > > > No UPC choice is available , but only 3 choices, assembly, Gnu c, > Gnu C++ > > Do you know how to make this work please ? > > Many thanks > > Tahar > > > > > > > > Le 4 f�vr. 09 � 17:16, Mike Kucera a �crit : > Eclipse supports editing of UPC source code. > > There is a UPC parser plug-in for Eclipse CDT, here are instructions > on how to set it up: > http://wiki.eclipse.org/PTP/other_tools_setup > > > Mike Kucera > Software Developer > IBM Eclipse CDT Team > mkucera_at_ca_dot_ibm_dot_com > > <graycol.gif>Dan Bonachea ---02/04/2009 10:48:39 AM---To my > knowledge we have not done any work to integrate BUPC with the xcode > <ecblank.gif> > From: <ecblank.gif> > Dan Bonachea <bonachea_at_cs_dot_berkeley_dot_edu> > <ecblank.gif> > To: <ecblank.gif> > Tahar Amari <[email protected]>, upc-users_at_lbl_dot_gov > <ecblank.gif> > Date: <ecblank.gif> > 02/04/2009 10:48 AM > <ecblank.gif> > Subject: <ecblank.gif> > Re: question > > > > To my knowledge we have not done any work to integrate BUPC with the > xcode > project system, everything we do is purely console-based. It may be > possible > to teach the xcode GUI to recognize it (and in fact, we have an open > enhancement request to do exactly that > http://upc-bugs.lbl.gov/bugzilla/show_bug.cgi?id=1931 ) but I don't > think > we've looked into that yet. > > If you do manage to get something working, we'd happily accept a > contribution > of the relevant tweaks required :) > > -D > > At 07:23 AM 2/4/2009, Tahar Amari wrote: > >Hello, > > > >I am new in UPC community. I have dowlnoaded binary installer for > UPC on Mac > >OS X/Leopard. > >I would like to create a Xcode Project which uses UPC compiler > and thus > >show it in the list of possible compilers > >for the project. > >I do not know how to do this . Is this possible please ? > > > >Many thanks > > > >Tahar > > > > > >-------------------------------------------- > >T. Amari > >Centre de Physique Theorique > >Ecole Polytechnique > >91128 Palaiseau Cedex France > >tel : 33 1 69 33 42 52 > >fax: 33 1 69 33 30 08 > >email: > ><<mailto:[email protected]>mailto:[email protected] > > > >URL : > ><http://www.cpht.polytechnique.fr/cpht/amari>http://www.cpht.polytechnique.fr/cpht/amari > > > >-------------------------------------------- > > > >T. Amari > > > >Centre de Physique Theorique > > > >Ecole Polytechnique > > > >91128 Palaiseau Cedex France > > > >tel : 33 1 69 33 42 52 > > > >fax: 33 1 69 33 30 08 > > > >email: > ><<mailto:[email protected]>mailto:[email protected] > > > > > >URL : > ><http://www.cpht.polytechnique.fr/cpht/amari>http://www.cpht.polytechnique.fr/cpht/amari > > > >